P
Polo5959
Tech Assistant
Hi Everyone,
I need a PC for 3D modeling, and rendering, and later animation.
I use a lot Rhino3D (which doesn't require a lot of power) and keyshot for product visualisation. I would like to slowly start rendering on blender and also do small animation of products. A later goal is to do architecture visualisation too.
CGDirector.com Parts List: https://www.cgdirector.com/pc-builder/?=6LUxw
CPU: AMD Ryzen 9 3950X 3.5GHz 16-Core Processor ($697.00)
CPU Cooler: be quiet! Dark Rock Pro 4 ($89.90)
Motherboard: Gigabyte B550 Aorus Pro AC ATX AM4 ($149.59)
Memory: 32GB (2 x 16GB) G.Skill Trident Z Neo DDR4-3600 C16 ($195.99)
Storage PCIe-SSD: Sabrent Rocket 1TB NVMe Gen4 M.2 Solid State Drive ($169.98)
Power Supply: Corsair CX Series CX450M 450W ATX 2.4 Power Supply ($69.64)
Case: NZXT H510 ATX Mid Tower Case ($139.99)
I initially wanted to get a rtx 2070super but everything is out of stock (also close ranges of graphics cards close by such as 2060, 2080...) And i saw that the 3070 is out and is better than what initial wanted for roughly the same price, so i was thinking to get this but its out of stock too. so i am thinking to get a very basic one just to do the job for the moment and get a 3070 when there will be stock again.
The basic one i was thinking was a gtx 1600 which is ok but starts to be a bit old now. And add the 3070 when out, ideally have those two connected, does the Gigabyte B550 Aorus Pro AC ATX AM4 allows this?
I am not sure those choices are the most relevant ones tho...
Thanks in advance
Paul
I need a PC for 3D modeling, and rendering, and later animation.
I use a lot Rhino3D (which doesn't require a lot of power) and keyshot for product visualisation. I would like to slowly start rendering on blender and also do small animation of products. A later goal is to do architecture visualisation too.
CGDirector.com Parts List: https://www.cgdirector.com/pc-builder/?=6LUxw
CPU: AMD Ryzen 9 3950X 3.5GHz 16-Core Processor ($697.00)
CPU Cooler: be quiet! Dark Rock Pro 4 ($89.90)
Motherboard: Gigabyte B550 Aorus Pro AC ATX AM4 ($149.59)
Memory: 32GB (2 x 16GB) G.Skill Trident Z Neo DDR4-3600 C16 ($195.99)
Storage PCIe-SSD: Sabrent Rocket 1TB NVMe Gen4 M.2 Solid State Drive ($169.98)
Power Supply: Corsair CX Series CX450M 450W ATX 2.4 Power Supply ($69.64)
Case: NZXT H510 ATX Mid Tower Case ($139.99)
I initially wanted to get a rtx 2070super but everything is out of stock (also close ranges of graphics cards close by such as 2060, 2080...) And i saw that the 3070 is out and is better than what initial wanted for roughly the same price, so i was thinking to get this but its out of stock too. so i am thinking to get a very basic one just to do the job for the moment and get a 3070 when there will be stock again.
The basic one i was thinking was a gtx 1600 which is ok but starts to be a bit old now. And add the 3070 when out, ideally have those two connected, does the Gigabyte B550 Aorus Pro AC ATX AM4 allows this?
I am not sure those choices are the most relevant ones tho...
Thanks in advance
Paul