Welcome to our Forum! Ask PC-Build Questions, discuss Tech-News, Content Creation & Gaming Workloads or get to know the CGDirector Community off-topic. Feel free to chime in with insight or questions on any existing topic too! :)

Reply to thread

Message: <blockquote data-quote="Polo5959" data-source="post: 1536" data-attributes="member: 501">Hi Everyone,I need a PC for 3D modeling, and rendering, and later animation.I use a lot Rhino3D (which doesn't require a lot of power) and keyshot for product visualisation. I would like to slowly start rendering on blender and also do small animation of products. A later goal is to do architecture visualisation too.CGDirector.com Parts List: <a href="https://www.cgdirector.com/pc-builder/?=6LUxw">https://www.cgdirector.com/pc-builder/?=6LUxw</a>CPU: AMD Ryzen 9 3950X 3.5GHz 16-Core Processor ($697.00)CPU Cooler: be quiet! Dark Rock Pro 4 ($89.90)Motherboard: Gigabyte B550 Aorus Pro AC ATX AM4 ($149.59)Memory: 32GB (2 x 16GB) G.Skill Trident Z Neo DDR4-3600 C16 ($195.99)Storage PCIe-SSD: Sabrent Rocket 1TB NVMe Gen4 M.2 Solid State Drive ($169.98)Power Supply: Corsair CX Series CX450M 450W ATX 2.4 Power Supply ($69.64)Case: NZXT H510 ATX Mid Tower Case ($139.99)I initially wanted to get a rtx 2070super but everything is out of stock (also close ranges of graphics cards close by such as 2060, 2080...) And i saw that the 3070 is out and is better than what initial wanted for roughly the same price, so i was thinking to get this but its out of stock too. so i am thinking to get a very basic one just to do the job for the moment and get a 3070 when there will be stock again. The basic one i was thinking was a gtx 1600 which is ok but starts to be a bit old now. And add the 3070 when out, ideally have those two connected, does the Gigabyte B550 Aorus Pro AC ATX AM4 allows this?I am not sure those choices are the most relevant ones tho...Thanks in advancePaul</blockquote>

Name

Verification