X570 changing CPU 2600 to 5600, no display mouse or keboard

[Alimalik]

Hi there, I installed a new 5600 Ryzen on Asus wifi x570 but monitor mouse keyboard stoped working, I changed it back to same 2600 Ryzen but whole PC turns on but no display mouse or keyboard lights working , I Wana do bios update but there is no flash bios button or bios white USB, I don't know how to update it, I did resert the crtl, disengage battery bower supply but nothing works , looks like only way is updating bios which I don't know how

 

[Jerry James]

If it was a BIOS issue, going back to a 2600 should've fixed your issue. When you say keyboard mouse, etc aren't working, do you mean Windows boots up properly?

 

[Alimalik]

No, I meant motherboard lights fans are turning on but no display , mouse keyboard lights not turning on,
And I have 4 LEDs on motherboard
Dram orange light is slowly blinking , I check ram and change the slot , turning it on without ram but same

 

[Jerry James]

No, I meant motherboard lights fans are turning on but no display , mouse keyboard lights not turning on,
And I have 4 LEDs on motherboard
Dram orange light is slowly blinking , I check ram and change the slot , turning it on without ram but same

Hm then it's most likely a RAM seating issue. If you have multiple sticks, try booting with just one

 

[Alimalik]

Ok I will get a new ram, and try tomorrow morning
Will update thanks

 

[Alimalik]

Hey mate, I have done it but did not work,



Atlast I have unplugged everything except power and cpu, reset the bios, and everything working now





Updated my bios and done

Thanks for the help