Graphics Coprocessor | No Graphics |
---|
Inateck PCI-e to USB 3.0 (4 Ports) PCI Express Card and 15-Pin Power Connector, Red
Return this item for free
Free returns are available for the shipping address you chose. You can return the item for any reason in new and unused condition: no shipping charges
Learn more about free returns.- Go to your orders and start the return
- Select the return method
- Ship it!
Return this item for free
Free returns are available for the shipping address you chose. You can return the item for any reason in new and unused condition: no shipping charges
Learn more about free returns.- Go to your orders and start the return
- Select the return method
- Ship it!
Purchase options and add-ons
Brand | Inateck |
Hardware Interface | PCI Express x4 |
Style | With Power |
Item Weight | 0.11 Pounds |
Operating System | Windows 8, Windows 7 |
About this item
- SuperSpeed USB 3.0 supports transfer rates of up to 5Gbps - The actual transmission speed is limited by the setting of the device connected
- 4 USB 3.0 downstream ports for standard desktop PCs; Supports USB Hot Plug, Plug & Play; Support LPM, Low Energy Consumption; 15 pin SATA Power Connector to power USB devices from your PC power supply
- Backwards compatible with USB 2.0 and 1.1 devices; Operating System Compatibility: Windows XP/Vista/7/8
- With quick and easy installation. All USB 3.0 PCI-E Cards require an external connection to the power supply of the PC in order to supply voltage to the USB buss
Frequently bought together
Get similar items fast
- ELUTENG PCIE USB 3.0 Card 7 Ports PCI Expree to USB Expansion Card Super Speed 5Gbps PCI-e USB3 Hub Controller Adapter for Windows 11/10/8/7/XP/VistaAmazon's Choicein Internal USB Port CardsFREE Shipping on orders over $35 shipped by AmazonGet it as soon as Monday, Apr 1
- BEYIMEI PCI-E to USB 3.2 Gen 1 Card 5Gbps Dual USB-A Ports Expansion Card with 20PIN Front Panel Header USB Card,PCI Express Card with 15-Pin SATA Power Connector.FREE Shipping on orders over $35 shipped by AmazonGet it as soon as Monday, Apr 1
Compare with similar items
This Item Inateck PCI-e to USB 3.0 (4 Ports) PCI Express Card and 15-Pin Power Connector, Red | Recommendations | dummy | dummy | dummy | dummy | |
Try again! Added to Cart Add to Cart | Try again! Added to Cart Add to Cart | Try again! Added to Cart Add to Cart | Try again! Added to Cart Add to Cart | Try again! Added to Cart Add to Cart | Try again! Added to Cart Add to Cart | |
Price | $17.98$17.98 | -11% $15.99$15.99 Typical: $17.99 | $19.99$19.99 | -6% $16.99$16.99 Typical: $17.99 | $39.99$39.99 | $79.99$79.99 |
Delivery | Get it as soon as Monday, Apr 1 | Get it as soon as Monday, Apr 1 | Get it as soon as Monday, Apr 1 | Get it as soon as Monday, Apr 1 | Get it as soon as Monday, Apr 1 | Get it as soon as Monday, Apr 1 |
Customer Ratings | ||||||
Easy to recognize | 4.6 | 4.8 | 3.8 | 4.8 | 4.0 | 4.4 |
Easy to install | 4.4 | 5.0 | 4.5 | 4.7 | 4.2 | 4.2 |
Tech Support | 3.7 | — | 2.5 | 2.6 | 4.4 | 4.3 |
Value for money | — | 4.6 | 3.7 | 4.2 | 3.8 | 4.0 |
Sold By | TNTonline | Sinefine Store | ELUTENG Direct | Sinefine Store | TNTonline | TNTonline |
hardware interface | pci express x4 | pci x 1, pci x 4, pci x 8, pci x 16 | pci | pci x 1, pci x 4, pci x 8, pci x 16, usb3.0 a, usb3.0 c | usb, usb c | pci express x16 |
operating system | Windows 8, Windows 7 | Linux, Mac OS X, Windows | Windows 11 | Mac OS X, Linux, Windows 11, Windows XP | Windows 11, Windows 7 | window, Linux, Mac OS |
card interface | pci e | — | — | — | pci e | pci e x16 |
style | With Power | Classic | Classic | Classic | 5 Ports | Classic |
Product Description
5 Gbps in total:
5 Gbps is shared by 4 downstream ports. This speed can be reached while only one downstream port is in use.
|
|
|
---|---|---|
UASP supported:It excellently show you the speed of USB 3.0 5 Gbps. |
Hot swap supported:The 4 downstream ports support hot swap function, plug and play. |
Installation and Driver:Please visit the official site of inateck, where installation video and free driver are available. |
Attention
1) If your PC's power supply unit has only free 4 pin Molex plugs left, please power the card using the enclosed 4 pin Molex to SATA converter. Please make sure the power cable strand colors match each other when connecting to the power augmentation to avoid a faulty current.
2) If there is no free 15 pin SATA plug available in your PC, please use the enclosed 15 pin to 2x 15 pin SATA Y-cable.
3) Aggregate transfer speed up to 500 MB/s (500 MB/s in total for the whole). For Rift users, it is recommended to purchase two PCI-E cards for multiple sensors.
PCI Express Expansion Card with 4 USB 3.0 Ports: With quick and easy installation, this PCI Express card expands your PC by four high-speed USB 3.0 interfaces.
Support UASP: 70% faster than traditional USB 3.0 with UASP. The UASP Transfer Protocol accelerates the read and write speed of the SSD hard disk.
Supported Operating Systems Compatible with Windows XP/ Vista/ 7/ 8/ 10. Windows 10 and Mac 10.8.2 and more latest systems are built with a driver inherently. Windows systems earlier than Windows 10 and Mac OS earlier than Mac 10.8.2 require installing a driver in CD
- No additional drivers are needed and it has built-in support for the FL1100(manufactured by Fresco) chipset.
Package
1x USB3.0 PCI-E expansion card
1x CD Driver
1x Mounting screw
1x User Manual
1x 4pin to 2x15pin cable (the cable in older computers without 15pin SATA power connector is used to 4pin convert Molex to SATA ports) 1x 15pin to 2x 15pin SATA Y-cable
Inateck KT5001 | Inateck KT4004 | Inateck KT4005 | Inateck KT4006 | Inateck KT2001 | |
---|---|---|---|---|---|
Add to Cart
|
|||||
Customer Reviews |
4.3 out of 5 stars
2,909
|
4.5 out of 5 stars
952
|
4.1 out of 5 stars
713
|
4.4 out of 5 stars
1,241
|
4.1 out of 5 stars
95
|
USB Ports | 5 USB A Ports | 4 USB A Ports | 4 USB A Ports | 2 USB A Ports | 1 USB C + 1 USB A |
From the brand
About Inateck
Enhance your digital life!
-
With the modern business simplicity style
and technology elements merged, plus the pragmaticism designing principle,
Inateck team has been making every effort to provide customers with the best product experience.
Thanks to the premium material, superb manufacturing technology. inateck products have won vast popularity among the consumers in Europe and America.
-
How did we get our start?
Starting in Germany, with the idea “Experience is everything”. Inateck has been specialized in the research, design, production.
What problem are we solving?
With the modern business simplicity style
and technology elements merged, plus the pragmaticism designing principle. Inateck team has been making every effort to provide customers with the best product experience.
Are our products high quality?
Thanks to the premium material, superb manufacturing technology. inateck products have won vast popularity among the consumers in Europe and America.
What's in the box
Product information
Technical Details
Brand | Inateck |
---|---|
Item model number | KTU3FR-4P |
Operating System | Windows 8, Windows 7 |
Item Weight | 1.76 ounces |
Product Dimensions | 4.72 x 3.15 x 0.71 inches |
Item Dimensions LxWxH | 4.72 x 3.15 x 0.71 inches |
Manufacturer | Inateck |
ASIN | B00B6ZCNGM |
Is Discontinued By Manufacturer | No |
Date First Available | August 9, 2013 |
Additional Information
Customer Reviews |
4.3 out of 5 stars |
---|---|
Best Sellers Rank | #78 in Internal USB Port Cards |
Warranty & Support
Feedback
Looking for specific info?
Customer reviews
Customer Reviews, including Product Star Ratings help customers to learn more about the product and decide whether it is the right product for them.
To calculate the overall star rating and percentage breakdown by star, we don’t use a simple average. Instead, our system considers things like how recent a review is and if the reviewer bought the item on Amazon. It also analyzed reviews to verify trustworthiness.
Learn more how customers reviews work on AmazonCustomers say
Customers like the performance and ease of installation of the card. For example, they mention it works as described, is easy to install, and has no manual driver installation required. Some appreciate the value. That said, opinions are mixed on quality, cables, usb ports, recognition, and drivers.
AI-generated from the text of customer reviews
Customers like the performance of the card. They mention that it works as described, runs just fine, and completes successfully on the first try. Some say that it's very impressed with the speeds and that it can use their Oculus at full speed. They also mention that the card plugs right in and plays fine with no additional software.
"...using a Seagate 3 TB drive I picked up at Costco and was very impressed with the speeds...." Read more
"...But once installed properly it works well with the Oculus and I'm using it to run a third sensor in USB 3.0 and the headset as well as the USB hub..." Read more
"...USAP makes this card plenty fast, assuming your USB device supports it.If you use Windows 10 all you have to do is:-..." Read more
"...I was happy to find out that this card works even with the old OS.After a week of use, my computer stopped recognizing the card...." Read more
Customers find the installation of the card to be easy when they follow other users' instructions. They also mention that the installation process is fairly straightforward, with no manual driver installation needed. Customers also appreciate the complete instructions and the ability to find the driver. Overall, customers find the process to be quick and easy.
"...Installation in the Mac Pro was a breeze. I had an open SATA hard-drive bay inside my Mac Pro and an open PCIe port...." Read more
"...this is an easy and inexpensive way to add USB 3 capability and therefore a few years of life to an otherwise good computer...." Read more
"____ U P D A T E D ____ R E V I E W:The card installed fine, including the separate power port...." Read more
"...Install was very easy for this card, it took more time to disconnect and reconnect all cables running to the CPU than it did to install the card...." Read more
Customers appreciate the value of the card. They say it's a good product for the price, and money well spent. Customers also say it works like a boss, and is an affordable upgrade.
"...Excellent product and a good price...." Read more
"...All in all a pretty cheap USB solution for the Oculus but I think if I had to choose again I'd spend a little more and look for something with on..." Read more
".../HDMI extension cables than this adapter for my VR setup, it's a fantastic value." Read more
"...with other reviewers this is a nice card, a good upgrade at a very reasonable price. Here's some observations on upgrading the driver...." Read more
Customers are mixed about the quality of the card. Some mention that it's an excellent product, while others say that it became unreliable. Some customers also report issues with the motion controllers lagging and the sensor throwing errors. Overall, the quality is mixed, and it'll depend on your preferences and needs.
"...Pretty impressive!Glad it works on the mac, even if it's not advertised to...." Read more
"...Not only will this card NOT provide USB 3 speed except on the newest of operating systems but it wastes money and it wastes a slot in your PC...." Read more
"...Excellent product and a good price...." Read more
"...It was an improvement over crawling on the floor, but became unreliable as far as thumb drives being recognized by the computer...." Read more
Customers are mixed about the cables. Some mention that it comes with all the power connector cable you might need in order to get it, while others say that the power supply cables are a bit short.
"...Other than that seems solidly built-included cables were great as they were needed on my Dell XPS to power up plug in items." Read more
"...You need to modify the cable slightly. I was a bit apprehensive to do this at first but once I did it, I laughed at how simple it is...." Read more
"...It also came with the adapters from the old standard power component connectors to the new Sata standard...." Read more
"...Installation went very smoothly, had an open power connector. Was able to use the adapter that was supplied to connect it...." Read more
Customers are mixed about the USB ports. Some mention that the card works and gives them USB 3.0 ports, while others say that the Fresco chipset tends to power down USB ports and the ports are not recognized at startup.
"...it still fits. NOTE 2: For some reason the 4th PCIe slot on the Mac Pro won't work...." Read more
"...this is an easy and inexpensive way to add USB 3 capability and therefore a few years of life to an otherwise good computer...." Read more
"...now on my computer but listed as being the 2.0 drive J. I can not power down the drive to properly disconnect the drive, I have to shut down the..." Read more
"...This is not JUST extra ports but also has a separate USB 3.0 controller so safely expand your USB 3.0 ports as well expand your maximum data transfer..." Read more
Customers are mixed about the recognition of the card. Some mention that it was simple to install, Windows 10 recognized the device immediately, and the drivers were recognized instantly. However, others say that after a week of use, their computer stopped recognizing the card and the OS never recognized it.
"...After a week of use, my computer stopped recognizing the card...." Read more
"...shut down properly and automatically and turn on and pair properly and automatically. I wish I had knows that...." Read more
"...Received the replacement card promptly on 12/11. Card was not recognized by Windows 10 when plugged into a PCIe 2.0 (x1 mode slot)...." Read more
"...any device in plugged into any of the four USB ports, the computer never sees them or acknowledges that a device has been added...." Read more
Customers are mixed about the drivers. Some mention that the included CD has the necessary drivers, while others say that it doesn't have any updated drivers for Windows 10 support.
"...have given a 5 star rating, but I took 1 star off because of problem loading driver." Read more
"...Dont need to download any software, just plug n play. However, do not use any other usb devices on this card EXCEPT YOUR RIFT S USB CABLE." Read more
"...Cons: Its not USB 4.0 which will hopefully one day when invented allow us to have external harddrives so we can use our device anywhere xD" Read more
"...Install from CD is flawed. First, it included drivers for a second card and you can pick the wrong one and go wrong,...." Read more
Reviews with images
-
Top reviews
Top reviews from the United States
There was a problem filtering reviews right now. Please try again later.
The Inateck card was cheaper than some of the other options (which had more reviews) and what convinced me to get the Inateck was the fact that it CAME WITH CABLES. No need to purchase additional cables since they're provided in the box. Unlike the YouTube video, Inateck listened to the reviewers comments and provided 2 separate, short cables, that don't have all the clunky extra connectors on them. (For the record, you don't actually NEED to connect this card to a Power Source in the computer ... technically it needs it to be able to provide power the specified power to the USB device, however, most USB devices that you're connecting this to will have their OWN power source (like a Powered Hub or a Powered External USB hard-drive). So for those of you nervous about connecting the card to a power source, don't worry.
Installation in the Mac Pro was a breeze. I had an open SATA hard-drive bay inside my Mac Pro and an open PCIe port.
Inateck included 2 cables with the USB card ... a SATA to 4-pin Molex connector (the "old school" connectors that go to a power supply ... or to a DVD bay) and SATA "Y-cable" (SATA to SATA). For the Mac Pro I used the Y-cable. Note that you will need to connect this SATA cable to an open SATA port on the motherboard. The Mac Pro has 4 easy to install Hard-Drive bays. Normally you'd slide a hard-drive into the bay and it would mate with the SATA connector but for this installation you'll need to use one of these open SATA ports.
I plugged the Inateck card into an open SATA port in my 4th hard-drive bay. Note that the SATA connector for a hard-drive is basically broken into 2 sections: POWER and DATA. The only part of the connector you need here is the 15-pin POWER section. Inateck provided a cable with the POWER section.
*However*, you need to know that the cable provided by Inateck will NOT fit properly out of the package. You need to modify the cable slightly. I was a bit apprehensive to do this at first but once I did it, I laughed at how simple it is. The Y cable with SATA on all ends will need to be modified. Take the end of it that has only 1 connector, this is the side that goes onto the motherboard (either one of the "Y" ends will plug into the Inateck card). The connector has a plastic nub on either end, so it would fit in a normal SATA Power connector, however you'll have to cut one of these ends off to fit on the Mac Pro. You're not cutting the connector, its pins, or its wires, you're simple cutting off the plastic nub so the connector will fit onto the Mac Pro's motherboard. First, make note of which orientation the connector must mate. You'll see that one side of the connector meets the edge of the connector in your computer. The other end would normally have the DATA section of the cable but the Inateck cable doesn't have the data section and instead it has a square end of plastic. You need to cut this part of plastic off so that the SATA cable will mate on the motherboard of the Mac Pro. I used a pair of scissors and a file to get the plastic end cut off. Once you've done this simple modification you can use the cable for installation.
To install in the Mac Pro:
1) Unplug the computer and touch something metal to ground yourself.
2) Unlock the case and take off the side door.
3) Lay the computer down.
4) There are 2 spring-loaded finger screws covering the available PCIe slots. Remove the 2 screws and take off the lock holding down the open PCIe cards.
5) Insert the Inateck USB card into an available PCIe slot (I used slot 3, for example). Make sure it's nice and snug in the PCIe slot
NOTE 1: The Inateck card doesn't use the entire length of the PCIe connector. Don't worry, it still fits.
NOTE 2: For some reason the 4th PCIe slot on the Mac Pro won't work. The computer will recognize the card but no power will be provided to your devices. This is a known issue and I found multiple references online to this. DON'T plug the card into the 4th PCIe slot.
6) Take one end of the SATA "Y-Connector", the side that has the "Y" with 2 of the same connector, and plug one of those into the Inateck card.
7) Take the other end of the SATA connector, the side that you cut the plastic off, and connect it to an available SATA POWER port in your Mac Pro (available hard-drive bay).
8) Put the PCIe cover back up using the spring-loaded finger screws.
9) Close up your computer
10) Power on and Enjoy.
I ran a speed test using a Seagate 3 TB drive I picked up at Costco and was very impressed with the speeds. The "Disk Speed Test" I ran (by Blackmagicdesign) clocked read and write speeds in the 150-170mb/sec range (averaged around 160mb/sec). Pretty impressive!
Glad it works on the mac, even if it's not advertised to.
I did NOT need any drivers to make this work on the Mac. I'm using Mac OS X 10.9.1 (Mavericks) and the drivers are built into the computer. USB 3.0 drivers are included in Mac OS X 10.8.2+.
I ordered it on a Saturday and the estimated delivery date was Wednesday. it arrived on Tuesday. it was well packaged.
My computer is a 4+ year old Alienware Aurora. No USB 3 ports but one eSATA port.
I had one expansion slot open and the card fit in without much effort. the problem is my available power is too far away from the card and I have had to order an eighteen inch extension cable to provide power to the card.
I am running Windows 8. the card was found when i booted the computer. the card shows in device manager and I did not have to install drivers.
but, without power I could not read a memory stick or powered external USB hard drive.
the cable should arrive Friday and I will finish the review.
3/6/2014 - 5 stars now.
with aid of a flash light I discovered my power cables were snapped in fitting to keep them from flopping around. I connected the card to the power and I could access a USB 3 memory stick and a USB 2 external hard drive. this is an easy and inexpensive way to add USB 3 capability and therefore a few years of life to an otherwise good computer. Excellent product and a good price.
I think when I get my extension cable I will use it and put the power wires back where they were which leaves the interior less cluttered.
So I bought this card based on the suggestion from the Oculus support site as a compatible card. It took some doing to install as the Oculus hardware would only ever connect as USB 2.0 with the included and updated mfg. drivers. You HAVE to use the microsoft provided drivers for it to function properly at USB 3.0 speeds with the Oculus hardware. Also for my needs the included Y adapter power cables were too short but that's because my PC wiring is well routed and all my available power connectors were on cables that already went somewhere too far away for the included cable to reach. So I had to make a longer extension cable.
But once installed properly it works well with the Oculus and I'm using it to run a third sensor in USB 3.0 and the headset as well as the USB hub that all my sim rig stuff plugs into. Haven't had any audio issues and my tracking is really solid in my 10x8 foot boundaries.
All in all a pretty cheap USB solution for the Oculus but I think if I had to choose again I'd spend a little more and look for something with on board regulators that don't require a power cable.
Top reviews from other countries
The chipset on this card however works flawlessly.
However, this card has been working perfectly fine for me and I'm glad I chose it. It was legitimately plug-and-play with 1 SATA power cable to power it, and I've had no issues with it so far after a few weeks of use.
As context, I use these to connect keyboard, mouse, and an external USB hub for other peripherals. I don't connect anything special to it like an Oculus like a lot of the other reviewers.
Personally, I don't see why they don't plug less straining peripherals into this hub and plug things like Oculus directly into their motherboards to be safe, but I've never had an Oculus so perhaps there's a reason for it.
Ich besitze einen Rechner (Windows 10) der zwar von seiner Rechenleistung her noch up to date ist, aufgrund eines älteren Motherboards jedoch leider keine USB3.0 Unterstützung bietet. Da ich mir gerade eine Oculus Rift VR Brille geholt habe und diese mindestens 2 USB 3.0 Anschlüsse benötigt, habe ich mich nach geeigneten Erweiterungskarten für meinen Rechner umgeschaut.
Diese Karte hier habe ich leider erst in zweiter Instanz entdeckt, zuerst hatte ich mein Problem durch den Kauf zweier!!! USB3.0 Karten der Firma Logilink (Typ PC0054A) geglaubt gelöst zu haben. Grundsätzlich funktionierten auch die Logilink Karten problemlos im Betrieb mit normalen USB 3.0 Geräten. Trotzdem erzählte jedoch die Konfigurationssoftware der Rift mir das die USB Anschlüsse nicht kompatibel seien, bzw. ggf. nicht die maximale Leistung und Geschwindigkeit bereitstellen könnten. Da habe ich dann mal ein wenig genauer nachgeforscht und herausgefunden das die Sensoren der Rift ein spezielles Feature der USB 3.0 Schnittstelle nutzen um Latenzzeiten in der Signalübertragung zu reduzieren. Dieses Feature nennt sich Multiple Transaction Translation(MTT). Der Chipsatz auf der Inateck Karte (Fresco Logic FL1100EX) unterstützt nämlich genau dieses Feature und bietet nebenbei noch einige andere Funktionen die "State of the Art" sind.
Lieferumfang:
Die Ausstattung ist reichlich, ich würde Sie als vollständig beschreiben. Für den aktuellen Preis der Karte hier auf Amazon (reduziert von 29 auf 19 Euro) ist sie sogar super und über dem Durchschnitt der anderen USB Karten.
Lieferumfang:
1 * -Eine Erweiterungskarte PCI-E auf 4 x USB3.0
1 * Treiber-CD, 2* Montageschraube,
1 * Anleitung, 1 * 4pin auf 2x15pin Kabel,
1 * SATA Strom-Y-Kabel SATA Buchse an 2x SATA Stecker
Einbau:
Der EInbau an sich ging völlig unproblematisch. Die Karte belegt einen freien PCI-E Steckplatz. Der muss natürlich mindestens im Rechner vorhanden sein. Die beiden Logilink Karten mit je 2 USB 3.0 Anschlüssen raus, die Inateck Karte rein. An dieser Stelle seien noch lobend die beiden Adapter und Befestigungsschrauben erwähnt die sich im Lieferumfang befinden. Der der Inateck Adapter unter anderem auch die Battery Charging (BC) Specification Revision 1.2 (Charging Downstream Port (CDP)), und China Charging YD/T 1591-2009 Standards unterstützt, bietet er auf seiner Platinen einen zusätzlichen SATA Powerconnector um die USB Anschlüsse beim LAden von Smartphones, Tablets etc. entsprechend mit Leistung zu unterstützen. Dazu schließt man entweder direkt einen freien SATA Power Connector von seinem Netzteil an die Adapterkarte an. Hat man keinen freien SATA Power Connector mehr, oder nur noch einen, so kann man den entsprechenden, mitgelieferten Y Connector nutzen, der aus einem Anschluss 2 macht. Für die, die nur einen der älteren 4 pol Power-Anschlüsse haben, liegt ein zweiter Adapter bei, der diesen auf 2 x SATA Power konvertiert. Das fidne ich sehr lobenswert,d a viele Installationen manchmal an solchen Kinigkeiten wie fehlenden Adapterkabeln etc, scheitert, die man dann mit viel Geld und Glück einzeln irgendwo nachkaufen muss. Also noch den internen Powerstecker draufgesteckt und fertig ! Die Karte wurde automatisch erkannt und eingerichtet. Die Treiber CD wurde zunächst nicht benötigt.
Test:
Der Gerätemanager (siehe Fotos) zeigte den Controller an, der zunächst scheinbar mit Microsoft Standardtreibern installiert wurde. Es gab keine unbekannten Geräte mehr im Gerätemanager. Ein erster Test mit externen USB Festplatten und Sticks zeigt auch das der Controller funktionell zur Verfügung stand. Geschwindigkeitstests ergaben das prinzipiell auch normale USB3.0 Übertragungsgeschwindigkeiten für die besagten Geräte zur Verfügung stand. Leider meldete die Geräteverwaltung des Oculus Setups für das Headset und den Camerasensor immer noch ein Problem mit den neuen USB 3.0 Anschlüssen. Diesmal jedoch mit dem interessanten Hinweis das man ggf. mit geupdateten Treiber von Fresco Logic ggf. eine bessere Performance errechen könnte. (Zuerst schaute ich auf der mitgelieferten Treiber CD nach, diese beinhaltete jedoch leider nur Treiber bis maximal Windows 7 64 bit. Schade, und das obwohl Win10 ja nun doch schon einige Tage auf dem Markt ist. Also ab auf die Herstellerseite und nach Windows 10 Treibern gesucht. Ich bin statt auf die Website von Inateck direkt auf die Website des Controllerchipherstellers (Fresco Logic) gegangen, da man dort oft die aktuelleren Treiber bekommt. In diesem Fall war es aber das selbe Treiberpaket in der Revision 3-0.3.6.8.0 welches auch Inateck auf seiner Website anbot:
Hier der Downloadlink (Wählt des Paket des USB 3.0 Hostcontrollers)
https://support.zoho.com/portal/frescologic/helpcenter/articles/latest-drivers
Schritte:
1. Ladet das o.a. Treiberpaket runter und installiert es
2. Entfernt danach die USB 3.0 Controllerkarte aus dem Gerätemanager
3. Startet die neue Hardwareerkennung neu, oder startet alternativ den Rechner neu
Dann wird der Controller nämlich mit den Herstellertreibern installiert und kann dann scheinbar mit allen Features arbeiten. Daraufhin gab es keine Meldungen mehr im Oculus Device Center. Alles prima.
Als weiteren Test habe ich versucht mein Samsung S6 Edge an einem der USB 3.0 Ports zu laden, gleichzeitig mit einem IPAD2. Funktioniert absolut problemlos und exakt so schnell wie es mit den Ladegeräten ebenfalls dauert. Fast Charge / Quickcharge 2.0/3.0 werden jedoch nicht unterstützt. Das wäre wohl auch zuviel des Guten. Weitere Performancetests und Benchmarkorgien des Controllers möchte ich euch ersparen, da ich nicht weiß ob meine Festplatten/Sticks hier überhaupt das aktuelle Maximum bringen (könnten) oder nicht. Jedenfalls liefen auch meine USB2.0 Geräte problemlos, sogar eine steinalte Hewlett Packard Digitalkamera mit USB 1.0 wurde ohne Mucken erkannt.
Fazit:
Ein prima Möglichkeit seinen älteren Rechner (Freien PCI-Express Bus vorausgesetzt) um (weitere) 4 USB 3.0 Ports zu erweitern. Der Lieferumfang mit den beiden Powerdapatern, Treiber CD, Anleitung und zweier Schrauben für die Befestigung ist als sehr gut zu bezeichnen. Im Verhältnis zu dem aktuellen Preis von 19 Euro (29 Euro vorher) ist sie mit 4 Ports sogar verhältnismäßig günstiger als einige anderen Karten. Der verwendete Chipsatz unterstützt die maximale Performance und alle Features der USB 3.0 Spezifikation, unter anderem auch das Multiple Transaction Translation(MTT) das die VR-Brille Oculus Rift für eine optimale Performace der Tracking-Sensoren und der Erfassungskamera benötigt. Alles in allem ein prima Dapter zu einem guten Preis. Leider befanden sich auf der mitgelieferten Treiber CD keine Windows 10 Treiber, die sich aber im Paket über die Inateck/Fresco Logic Seiten problemlos herunterladen ließen. Von einer automatischen Installation von Windows 10 mit Windows Standard Treibern sollte man sich nicht täuschen lassen (siehe Bilder), danach stehen nicht alle Features wie Multiple Transaction Translation(MTT) zur Verfügung. Treiber direkt vom Hersteller besorgen und nachinstallieren !
Reviewed in Germany on October 8, 2016
Ich besitze einen Rechner (Windows 10) der zwar von seiner Rechenleistung her noch up to date ist, aufgrund eines älteren Motherboards jedoch leider keine USB3.0 Unterstützung bietet. Da ich mir gerade eine Oculus Rift VR Brille geholt habe und diese mindestens 2 USB 3.0 Anschlüsse benötigt, habe ich mich nach geeigneten Erweiterungskarten für meinen Rechner umgeschaut.
Diese Karte hier habe ich leider erst in zweiter Instanz entdeckt, zuerst hatte ich mein Problem durch den Kauf zweier!!! USB3.0 Karten der Firma Logilink (Typ PC0054A) geglaubt gelöst zu haben. Grundsätzlich funktionierten auch die Logilink Karten problemlos im Betrieb mit normalen USB 3.0 Geräten. Trotzdem erzählte jedoch die Konfigurationssoftware der Rift mir das die USB Anschlüsse nicht kompatibel seien, bzw. ggf. nicht die maximale Leistung und Geschwindigkeit bereitstellen könnten. Da habe ich dann mal ein wenig genauer nachgeforscht und herausgefunden das die Sensoren der Rift ein spezielles Feature der USB 3.0 Schnittstelle nutzen um Latenzzeiten in der Signalübertragung zu reduzieren. Dieses Feature nennt sich Multiple Transaction Translation(MTT). Der Chipsatz auf der Inateck Karte (Fresco Logic FL1100EX) unterstützt nämlich genau dieses Feature und bietet nebenbei noch einige andere Funktionen die "State of the Art" sind.
Lieferumfang:
Die Ausstattung ist reichlich, ich würde Sie als vollständig beschreiben. Für den aktuellen Preis der Karte hier auf Amazon (reduziert von 29 auf 19 Euro) ist sie sogar super und über dem Durchschnitt der anderen USB Karten.
Lieferumfang:
1 * -Eine Erweiterungskarte PCI-E auf 4 x USB3.0
1 * Treiber-CD, 2* Montageschraube,
1 * Anleitung, 1 * 4pin auf 2x15pin Kabel,
1 * SATA Strom-Y-Kabel SATA Buchse an 2x SATA Stecker
Einbau:
Der EInbau an sich ging völlig unproblematisch. Die Karte belegt einen freien PCI-E Steckplatz. Der muss natürlich mindestens im Rechner vorhanden sein. Die beiden Logilink Karten mit je 2 USB 3.0 Anschlüssen raus, die Inateck Karte rein. An dieser Stelle seien noch lobend die beiden Adapter und Befestigungsschrauben erwähnt die sich im Lieferumfang befinden. Der der Inateck Adapter unter anderem auch die Battery Charging (BC) Specification Revision 1.2 (Charging Downstream Port (CDP)), und China Charging YD/T 1591-2009 Standards unterstützt, bietet er auf seiner Platinen einen zusätzlichen SATA Powerconnector um die USB Anschlüsse beim LAden von Smartphones, Tablets etc. entsprechend mit Leistung zu unterstützen. Dazu schließt man entweder direkt einen freien SATA Power Connector von seinem Netzteil an die Adapterkarte an. Hat man keinen freien SATA Power Connector mehr, oder nur noch einen, so kann man den entsprechenden, mitgelieferten Y Connector nutzen, der aus einem Anschluss 2 macht. Für die, die nur einen der älteren 4 pol Power-Anschlüsse haben, liegt ein zweiter Adapter bei, der diesen auf 2 x SATA Power konvertiert. Das fidne ich sehr lobenswert,d a viele Installationen manchmal an solchen Kinigkeiten wie fehlenden Adapterkabeln etc, scheitert, die man dann mit viel Geld und Glück einzeln irgendwo nachkaufen muss. Also noch den internen Powerstecker draufgesteckt und fertig ! Die Karte wurde automatisch erkannt und eingerichtet. Die Treiber CD wurde zunächst nicht benötigt.
Test:
Der Gerätemanager (siehe Fotos) zeigte den Controller an, der zunächst scheinbar mit Microsoft Standardtreibern installiert wurde. Es gab keine unbekannten Geräte mehr im Gerätemanager. Ein erster Test mit externen USB Festplatten und Sticks zeigt auch das der Controller funktionell zur Verfügung stand. Geschwindigkeitstests ergaben das prinzipiell auch normale USB3.0 Übertragungsgeschwindigkeiten für die besagten Geräte zur Verfügung stand. Leider meldete die Geräteverwaltung des Oculus Setups für das Headset und den Camerasensor immer noch ein Problem mit den neuen USB 3.0 Anschlüssen. Diesmal jedoch mit dem interessanten Hinweis das man ggf. mit geupdateten Treiber von Fresco Logic ggf. eine bessere Performance errechen könnte. (Zuerst schaute ich auf der mitgelieferten Treiber CD nach, diese beinhaltete jedoch leider nur Treiber bis maximal Windows 7 64 bit. Schade, und das obwohl Win10 ja nun doch schon einige Tage auf dem Markt ist. Also ab auf die Herstellerseite und nach Windows 10 Treibern gesucht. Ich bin statt auf die Website von Inateck direkt auf die Website des Controllerchipherstellers (Fresco Logic) gegangen, da man dort oft die aktuelleren Treiber bekommt. In diesem Fall war es aber das selbe Treiberpaket in der Revision 3-0.3.6.8.0 welches auch Inateck auf seiner Website anbot:
Hier der Downloadlink (Wählt des Paket des USB 3.0 Hostcontrollers)
https://support.zoho.com/portal/frescologic/helpcenter/articles/latest-drivers
Schritte:
1. Ladet das o.a. Treiberpaket runter und installiert es
2. Entfernt danach die USB 3.0 Controllerkarte aus dem Gerätemanager
3. Startet die neue Hardwareerkennung neu, oder startet alternativ den Rechner neu
Dann wird der Controller nämlich mit den Herstellertreibern installiert und kann dann scheinbar mit allen Features arbeiten. Daraufhin gab es keine Meldungen mehr im Oculus Device Center. Alles prima.
Als weiteren Test habe ich versucht mein Samsung S6 Edge an einem der USB 3.0 Ports zu laden, gleichzeitig mit einem IPAD2. Funktioniert absolut problemlos und exakt so schnell wie es mit den Ladegeräten ebenfalls dauert. Fast Charge / Quickcharge 2.0/3.0 werden jedoch nicht unterstützt. Das wäre wohl auch zuviel des Guten. Weitere Performancetests und Benchmarkorgien des Controllers möchte ich euch ersparen, da ich nicht weiß ob meine Festplatten/Sticks hier überhaupt das aktuelle Maximum bringen (könnten) oder nicht. Jedenfalls liefen auch meine USB2.0 Geräte problemlos, sogar eine steinalte Hewlett Packard Digitalkamera mit USB 1.0 wurde ohne Mucken erkannt.
Fazit:
Ein prima Möglichkeit seinen älteren Rechner (Freien PCI-Express Bus vorausgesetzt) um (weitere) 4 USB 3.0 Ports zu erweitern. Der Lieferumfang mit den beiden Powerdapatern, Treiber CD, Anleitung und zweier Schrauben für die Befestigung ist als sehr gut zu bezeichnen. Im Verhältnis zu dem aktuellen Preis von 19 Euro (29 Euro vorher) ist sie mit 4 Ports sogar verhältnismäßig günstiger als einige anderen Karten. Der verwendete Chipsatz unterstützt die maximale Performance und alle Features der USB 3.0 Spezifikation, unter anderem auch das Multiple Transaction Translation(MTT) das die VR-Brille Oculus Rift für eine optimale Performace der Tracking-Sensoren und der Erfassungskamera benötigt. Alles in allem ein prima Dapter zu einem guten Preis. Leider befanden sich auf der mitgelieferten Treiber CD keine Windows 10 Treiber, die sich aber im Paket über die Inateck/Fresco Logic Seiten problemlos herunterladen ließen. Von einer automatischen Installation von Windows 10 mit Windows Standard Treibern sollte man sich nicht täuschen lassen (siehe Bilder), danach stehen nicht alle Features wie Multiple Transaction Translation(MTT) zur Verfügung. Treiber direkt vom Hersteller besorgen und nachinstallieren !