G
Gargar
Guest
Hey! Thanks for this website it’s been great for learning about PCs for CG stuff!
I’m looking for a solid build mostly for using Blender. I’ve been using an old laptop with no GPU for rendering and it’s just not cutting it for what I want to do. I’d like it to be a good all around/generalist build since I like to do a lot of different stuff in the software. Animation, procedural/node based stuff (figuring out these 3.0 geo nodes has been a blast), modeling, some vfx and motion design, etc. would love for it to render decently too. I know its a tall order
I’m also a light gamer and would be using it for some music stuff but primary workload would be Blender.
My budget is around the $2500 mark and I’m in the US. Something I could upgrade later if needed would be great.
This build that the site came up with seems pretty good to me but this is my first build and am still learning so I’m not too sure.
any thoughts or recommendations?
Thank you!
Luc
CGDirector.com Parts List: https://www.cgdirector.com/pc-builder/?=6MLK5
CPU: AMD Ryzen 9 5950X 3.4GHz 16-Core Processor ($749.00)
CPU Cooler: be quiet! Dark Rock Pro 4 ($89.90)
Motherboard: MSI X570 Tomahawk ATX AM4 ($250.00)
GPU: AMD Radeon RX 6700XT - PowerColor Red Devil ($849.99)
Memory: 64GB (4 x 16GB) G.Skill Ripjaws V DDR4-3200 C16 ($249.99)
Storage PCIe-SSD: Samsung 980 PRO 1000GB M.2 Solid State Drive ($179.99)
Power Supply: EVGA 650 B5, 80 Plus Bronze 650W Power Supply ($59.99)
Case: NZXT H510 ATX Mid Tower Case ($164.99)
Total: $2593.85
I’m looking for a solid build mostly for using Blender. I’ve been using an old laptop with no GPU for rendering and it’s just not cutting it for what I want to do. I’d like it to be a good all around/generalist build since I like to do a lot of different stuff in the software. Animation, procedural/node based stuff (figuring out these 3.0 geo nodes has been a blast), modeling, some vfx and motion design, etc. would love for it to render decently too. I know its a tall order
I’m also a light gamer and would be using it for some music stuff but primary workload would be Blender.
My budget is around the $2500 mark and I’m in the US. Something I could upgrade later if needed would be great.
This build that the site came up with seems pretty good to me but this is my first build and am still learning so I’m not too sure.
any thoughts or recommendations?
Thank you!
Luc
CGDirector.com Parts List: https://www.cgdirector.com/pc-builder/?=6MLK5
CPU: AMD Ryzen 9 5950X 3.4GHz 16-Core Processor ($749.00)
CPU Cooler: be quiet! Dark Rock Pro 4 ($89.90)
Motherboard: MSI X570 Tomahawk ATX AM4 ($250.00)
GPU: AMD Radeon RX 6700XT - PowerColor Red Devil ($849.99)
Memory: 64GB (4 x 16GB) G.Skill Ripjaws V DDR4-3200 C16 ($249.99)
Storage PCIe-SSD: Samsung 980 PRO 1000GB M.2 Solid State Drive ($179.99)
Power Supply: EVGA 650 B5, 80 Plus Bronze 650W Power Supply ($59.99)
Case: NZXT H510 ATX Mid Tower Case ($164.99)
Total: $2593.85